You are here

Gjutning med engångsform

Gjutning med engångsform innebär att gjutformen tillverkas i ett material som en sönderlelas efter varje gjutcykel

Automatic line casting

Process Forming process where mold halves are stacked above each other to form a series of intermediate molds.

Gypsum forming

Process Casting process using a disposable plaster mold.

Lost foam casting

Process Forming process in which molten material is poured on a polystyrene detail surrounded by a ceramic shell is immersed in the sand.

Lost wax casting

Process Forming process with one-time form that is created around a wax model where the wax is then melted away to be replaced by molten metal.

Resin sand molding

Process Forming process where a sand mold made of resin-bonded sand used to create a molded product.

Sand casting

Process Forming process where a sand mold made of green sand is used to create a molded product.

Shaw Casting

Process Casting method where a form created with silica gel is burned twice to create favorable micro-cracks and minimize impurities.

Shell Molding

Process Forming process where two shells of hardened resin-bonded sand is created over heated models and then assembled to form a complete mold.

Unicasting

Process Casting method with a form created with silica gel and burned with a blowtorch to create favorable micro cracks and reduce impurities.